DAM-3018AA

DAM-3018AA is an 8-channel signal relay output module, including 4-channel C-type relays and 4-channel A-type relays, each channel has LED indicator light indication, RS485 communication interface, and standard ModbusRTU protocol. It is equipped with a good human-computer interface, so it is easy to use and its performance is stable.

Market price

0.0

Number of views:

1000

Category

Products

Data acquisition module

RS485 acquisition module

Quantity



Product description

Digital Output
Output Channel	There are 8 channels of signal relays, of which 4 channels are C-type relays and 4 channels are A-type relays.
Contact Material	Ag+Au clad (silver+gold cladding)
Rated Control Capacity (Resistive Load) _{Note 1}	2A, 30V DC
Contact Maximum Allowable Current (Resistive Load)	2A
Contact Maximum Switching Voltage (Resistive Load) _{Note 2}	220V DC or 220V AC
Minimum Applicable Load (Resistive Load)	10µA 10mV DC
Relay Off Time	4ms (max)
Relay 0n Time	4ms (max)
Mechanical Life	More than 100 million times (on-off frequency 180 times/min)
Electrical Life	More than 100,000 times (under 2A 30V DC resistive load), more than 500,000 times (under 1A 30V DC resistive load) (on-off frequency 20 times/min)
Operating Mode	DO output, low to high delay output, high to low delay output, pulse output
Others
Communication Interface	RS485
RS485 Communication Rate _{Note 3}	Maximum 180 times/second (total channel of single module, under 115200bps) Maximum 24 times/second (total channel of single module, under 9600bps) Maximum 3 times/second (total channel of single module, under 1200bps)
Baud Rate	1200~115200bps
Watchdog	software watchdog
Supply Voltage	+10~30VDC
Power Protection	Power reverse protection
Power Consumption	Rated 0.5W @ 24VDC
Operating Temperature	-10℃～＋70℃
Storage Temperature	-40℃～＋80℃

Note：

1. Resistive Load: The maximum value of all parameters of the relay is realized when the load is resistive load. Resistive load means the load that iodine tungsten lamp, incandescent lamp, resistance furnace, oven, electric water heater, etc. will not cause voltage and current phase changes.

2. Contact Maximum Switching Voltage: this value is the maximum value when the load is a resistive load, and supports DC and AC voltage. If the load is a capacitive load or an inductive load, this indicator may be reduced.

3. RS485 Communication Rate: This parameter refers to the communication speed between the MCU controller and the host computer, which belongs to the theoretical maximum value. The communication rate will also be affected by the length of the field wiring, the number of loaded modules, the programming architecture of the host computer, and the hardware capabilities of the CPU.

Scan the QR code to read on your phone

DAM-3018BA

DAM-3018D

There is currently no content to display

China (中文简体)